DIMENSIONS
‘A’ = TOTAL WIDTH OF WHEEL
‘B’ = BOLT UP FACE INTO CAR
‘C’ = BOLT UP FACE TO INNER EDGE OF WING
‘D’ = FORWARD PROTRUSION OF BRAKE CALIPER
Three piece wheels consist of a computer spun inner and outer rim section and a centre hub. When selecting your wheel size it is important to remember that our wheel sizes given are tyre seat to tyre seat.
EXAMPLE: IF YOU ORDER A 7.0 x 15” WHEEL DIMENSION ‘A’ = 8.0”
OFFSET
The amount of wheel going INTO the car from the wheel centreline is POSITIVE.
The amount of wheel moving OUT of the car from the centreline is NEGATIVE.
The drawing below shows the POSITIVE offset, along with dimensions ‘A’ ‘B’ ‘C’ and ‘D’ |
| |
 |
The measurement from the wheel mounting face to the outside of the car
STATE C DIMENSION
The measurement to check the brake caliper protrusion forwards of the wheel mounting face
STATE D DIMENSION |
|
 |
 |
 |
| Dimension B |
Dimension C |
Dimension D |
|
|
PCD (PITCH CIRCLE DIAMETER)
Pitch circle diameter stud patterns
|
We can accommodate larger PCD sizes on our Billet centres.
Example 5x130mm plus.
We can also do CENTRE LOCK in some Cast and Billet styles
If you require further information on any of the above, please give us a call and we will be happy to help. |
|
SPLIT RIM WHEELS
Every set of wheels we manufacture are MADE TO ORDER to suit your vehicle application. We do not keep finished wheels in stock.
A split rim wheel consists of an Outer Rim, Centre Hub and Inner Rim. Dependent on the fitment needed these three sections can be assembled either as a FRONT MOUNT construction or SANDWICH MOUNT construction.
|
|
 |
FRONT MOUNT |
SANDWICH MOUNT |
|
We can supply some wheels with the perimeter bolts hidden – CLASSIC BUILD (Front mount construction only) (extra cost £5.00 per wheel.)
|
|
 |
STANDARD BUILD |
CLASSIC BUILD |
|
| All wheels are dispatched fully assembled and ready to have tyres fitted. They come complete with fixing nuts or bolts and centre caps, unless you have ordered Lockplates or Spinners. All Image Wheels have been constructed to either British BS AU:50 or T.U.V standards. |
|
CENTRE HUB
Available in either cast or billet material |
|
CAST STYLES
Are manufactured from dies or patterns and ‘cast’ from prime alloy ingot. The centres are supplied POWDER COATED. Our standard colours are:
SILVER
GOLD
ANTHRACITE
GLOSS BLACK
MATT BLACK
POST OFFICE RED
GLOSS WHITE
ORANGE
BRITISH RACING GREEN
YELLOW
GREY PRIMER
Cast centre and rims in virgin form
|
|
BILLET CENTRES
Are manufactured from a solid circle of prime aluminium billet . The style is ‘milled’ out on various CNC machines. We can produce one off designs in low volumes (Prototype work etc). The centres can be supplied POLISHED, POLISHED AND CERAMIC COATED (extra £10 per item) or POWDER COATED (No extra cost)
PLEASE NOTE: The Billet prices may be higher on some applications e.g. Centre Lock or 4/6 pot calipers. This is because a much thicker piece of Billet would have to be used.
Billet centre and rims in virgin form
|
|
OUTER RIM
This component is flow formed from prime aluminium sheet. Sizes start at 1.0” wide and increase in half inch increments.
Standard supply is POLISHED finish, but you can request on your order sheet for the rims to be CERAMIC COATED or ANODIZED. (Extra cost. Both £10 per item.)
INNER RIM
This component is also flow formed from prime aluminium sheet. Sizes start as 3.5” wide and increase in half inch increments.
Standard supply is ANODIZED finish. You can have it supplied POLISHED at no extra cost, just stipulate this on your order.
|
|
| POLISHED / CERAMIC CLEAR COAT / POWDER COAT / ANODIZED PLEASE SEE FINISHES FOR MORE DETAIL. |
